Do you need a spare part?

Image Description Art. n.
BLM chip Ø 100 μm hole – Polyimide septum Ø 100 μm hole, 12.5 μm thickness, min order 3 001417
BLM chip Ø 150 μm hole – Polyimide septum Ø 150 μm hole, 12.5 μm thickness, min order 3 001418
Nanopore Flow Cell – (PMMA or TEFLON) with gaskets 0022##
BLM cuvette – N. 2 cuvettes of 1ml each made by black POM (Delrin), including two gaskets, inox screws 000698
BLM cuvette MM – N. 2 cuvettes of 1ml each made by black POM (Delrin), including inox screws 002838
eONE holder – holder for eONE amplifier 000688
Faraday cage – 160x100x50mm, white painted aluminium with rotating lid 000760
GND cable – 65 cm cable with clip 000927
Paintbrush – synthetic paint brush 000498
USB cable – 1,8 mt length, from A type to mini B 001846
SMA pipette holder for 1.5 mm Ø pipes 000819
SMB electrode connector – SMB adaptor with two sockets for 0.5 mm Ø Ag electrodes 000635
Kapton 50 – Kapton septum of 25 µm thickness – hole 50 µm Ø (only for BLM Cuvette-MM) 002843
Kapton 75 – Kapton septum of 25 µm thickness – hole 75 µm Ø (only for BLM Cuvette-MM) 002844
Kapton 100 – Kapton septum of 25 µm thickness – hole 100 µm Ø (only for BLM Cuvette-MM) 002839
Kapton 150 – Kapton septum of 25 µm thickness – hole 150 µm Ø (only for BLM Cuvette-MM) 002841
Kapton 200 – Kapton septum of 25 µm thickness – hole 200 µm Ø (only for BLM Cuvette-MM) 002842
Teflon 50 – Teflon septum of 50 µm thickness – hole 50 µm Ø (only for BLM Cuvette-MM) 002903
Teflon 80 – Teflon septum of 50 µm thickness – hole 80 µm Ø (only for BLM Cuvette-MM) 002904
Teflon 100 – Teflon septum of 50 µm thickness – hole 100 µm Ø (only for BLM Cuvette-MM) 002905
Polyimide 100 – Polyimide septum of 50 µm thickness – hole 100 µm Ø 001064
Polyimide 150 – Polyimide septum of 50 µm thickness – hole 150 µm Ø 001065
Polyimide 200 – Polyimide septum of 50 µm thickness – hole 200 µm Ø 001066
PTFE 50 – Teflon septum of 50 µm thickness – hole 50µm Ø 002212
PTFE 80 – Teflon septum of 50 µm thickness – hole 80µm Ø 002213
PTFE 110 – Teflon septum of 50 µm thickness – hole 110µm Ø 002214
Model Cell – ePatch model cell with SMA connector 000911
ePatch reference wire for 0.5 mm Ø Ag electrode 000928
Model Cell reference pin to pin wire 001032
SMB and 1 mm pin adaptor for 0.5 mm Ø Ag electrodes – for e1 Plus and HC amplifier 001153
SMA and 1 mm pin adaptor for 0.5 mm Ø Ag electrodes – for ePatch amplifier 001154